Have any feedback for us? We'd love to hear it! Call us at (760) 910-7600 and let us know how we are doing.
Overall Experience
Quality
Price
Convenience
Miguel was very professional and knowledgeable. We were very happy with his performance.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Hyde’s skilled techs perform a service like no other. This family-owned business keeps the tradition of trusted home maintenance alive, consistently delivering excellence at the highest level.
Response from Hydes Air Conditioning:
Thank you so much!
Overall Experience
Quality
Price
Convenience
A true partner in maintaining my home. A trusted “go to” family owned business I’ve had for more than a decade. Hyde’s Friendly Skilled knowledgeable technicians set their ethics way above and way beyond greedy unskilled price gouging corporate owned entities. Barry Hyde and his brothers have set a high bar for quality and guaranteed work.
Response from Hydes Air Conditioning:
Thank you so much for the best review! We value you as well Annette.
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Ruben was a very good technician. He was polite, and explained everything he was doing. We love Hydes!
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Very well spoken individual. And very sincere thank you so much to the Hydes crew! They Never disappoint!
Response from Hydes Air Conditioning:
Thank you for the great review Ryan
Overall Experience
Quality
Price
Convenience
Overall Experience
Quality
Price
Convenience
Performed leak detection test found leak in evaporator coil. Need to consult with management then send over estimates.
Performed a semi annual cooling service on split heat. Left filter replacement. Cycled equipment followed, cooling sequence of operation checked refrigerant/temperature split checked capacitor, fan motor, hard start, compressor, amps and voltage. Cleared condensation line and tested water safety switch at air handler/hallway, mechanical closet. Thermostat checked out OK. Secured and clean electrical connections at condenser and fuse box. Rinsed condenser coil. Cooling equipment checked out operational at this visit.
I removed defective hard start kit for the downstairs 3.5 ton unit (s#5000) and installed new hard start kit and tested the system.
Upon arrival client stated system had error code 184. Systems are 2022 American standard side discharge heat pumps. Found both systems working. Checked alert history on systems. Checked both systems AOC. Washed coils and signed up on yearly agreement. Took pictures of auid numbers so we can monitor at office. Checked app to allow. Found previous company didn’t run new low voltage wires. Advised on possible issues with communication side.
Service Type: Demand Service – No Cooling Status at Arrival: System running continuously but not reaching set temperature Tenant Note: Just moved in the day before; reports cooling issue despite system running ⸻ Diagnostic Summary: • Thermostat reading: 4°F above setpoint upon arrival, indicating system unable to maintain temperature • Temperature split: 18°F (Supply air at 64°F), measured at garage upflow furnace • Compressor: Producing unusual noise • Refrigerant pressures: Low side reading in the 170s PSI – abnormal for R-410A system • Furnace & interior check: Found a 3°F heat gain, same at supply—indicating poor insulation or duct issues • System mismatch discovered: • Evaporator coil is R-22 • Outdoor condenser (2016) is R-410A • Incompatible refrigerant types—system not properly matched ⸻ Recommendations: • Evaporator coil is incompatible with the outdoor R-410A unit and must be replaced • Due to compressor noise and potential compressor failure, highly recommend
Performed annual maintenance on a 2024 5 ton American standard platinum series unit. Replaced filter in FAU (20x25) and cleared drain line. Washed down mini-split filters and ductless unit coils. Checked system amperage, refrigerant Freon levels, and verified no alerts were present on the system. Washed down condenser coils. Confirmed system operation; 1050 checked into range reading, no alerts found.
Performed a cooling maintenance on a 2018 American Standard gold series condenser, condenser located on right side of home, filter located in hallway ceiling, fau located in attic, changed filter, flushed condensation line, on condenser check for amperage and voltage, check for compressor, check for freon level, check for capacitors, everything within range also check why the unit stopped working checked for blower motor, check for amperage everything working properly did not find any issue, also clear out dust accumulated inside electrical component area and rinsed condenser coil. System is working within specification in cooling at the time of maintenance.
Performed annual maintenance on 2020 5 ton American standard gold series. Checked amperage , Freon levels, and motors. Capacitor’s still working in range no signs of leaks or restrictions. Cleared condensation line and wash down condenser coils of mini split also. System working into range working efficiently levels.
Performed a cooling maintenance on a 2007 American Standard condenser, condenser located on backside of home, filter located in hallway ceiling, fau located in garage, changed filter, flushed condensation line, on condenser check for amperage and voltage, check for compressor, check for freon level, check for capacitors, everything within range also clear out dust accumulated inside electrical component area and rinsed condenser coil. System is working within specification in cooling at the time of maintenance.
Performed a cooling maintenance on a Trane XR condenser, condenser located on backside of home, filter located inside filter rack, fau located in hallway closet, changed filter, flushed condensation line, on condenser check for amperage and voltage, check for compressor, check for freon level, check for capacitors, everything within range also clear out dust accumulated inside electrical component area and rinsed condenser coil. System is working within specification in cooling at the time of maintenance.
Today’s annual maintenance consisted of four Goodman units. Replaced all the filters inside the home (3) 20x20 (3) 16x16 18x18. Including the casita. Ensured all four thermostats are responding correctly and properly working for each unit. amp rush checked out good for each of the units, they’re all in proper range. Capacitor on all the four units are checked out good, in correct range. condensation lines have been cleared and are properly draining at this time of service. thoroughly washed the coils down for each of the units. All four systems are cooling and operating correctly at this time of service.
Came to property for landscape lighting issue. Looks like light may have been knocked over. Re-inserted the light into the ground. Also verified that all lights for landscape system are functioning.
Service Date: 2006 Service Type: Semi-Annual Cooling Maintenance – Two Goodman Split Systems Service Performed: • Replaced filters: (2) 14x14, (1) 20x20, and (1) 20x30 (ceiling-mounted) • Cycled both systems, verified proper cooling sequence of operation • Checked refrigerant charge and temperature split • Inspected capacitors, fan motors, compressors; recorded amperage and voltage readings • Thermostats tested and confirmed operational • Inspected both furnaces in attic: • Cleared condensation lines • Cleaned furnace platforms and units • Verified clear drainage at exterior discharge points System Serial Number: *****280X Findings: • System operating at maximum rated amperage • Found capacitor out of manufacturer’s recommended range • Recommended and received approval to replace capacitor • Low-voltage wiring at both condensers deteriorated due to sun exposure • Recommended and received approval to replace thermostat wires Repairs Completed: • Replaced weak capacito
Upon arrival blower motor was only running After Diagnostic found bad run capacitor replaced part unit is up and cooling
Found condensate line out into condensate pump where the plug was. Also found line going up hill. Fixed issue and cycled system.